Open Engineering Reference Tools by YIXING
YIXING Labeling Tolerance Stack-Up, 500 mm/s Tape Cycle & 3D Carton Erector Calculators
Verify allowable machine repeatability (±0.05 mm dual-camera CCD vision labelers vs. ±0.5 mm CCD vision tape applicators vs. ±1.0 mm mechanical fixtures, excluding incoming part error), 500 mm/s roll-fed tape output, and YX-KB/CS/CH end-of-line 3D carton erector sizing before sample testing.
Aggiornato
1. YIXING Labeling & Taping Tolerance Stack-Up Calculator
Compute allowable machine placement repeatability from target assembly tolerance using RSS and worst-case models.
2. YIXING 500 mm/s Industrial Tape Cycle & Roll Yield Estimator
Estimate realistic pcs/h and roll yield for double-sided tissue, acrylic foam, and PI high-temp tapes (≥30 mm standard cut).
3. YIXING YX-KB/CS/CH 3D Carton Erector & Mailer Matcher
Match end-of-line 3D carton erectors and FEFCO 0427 mailer formers (15–75 boxes/min) by erected L×W×H and board gsm.
YIXING Precision & Throughput Reference Matrix Across Four Product Lines
| Equipment Architecture | Machine Repeatability (Excl. Part Error) | Rated Speed / Throughput | Primary Industrial Use Case |
|---|---|---|---|
| Dual-Camera CCD Vision Labeler | ±0.05 mm | 15–25 pcs/min | PCBs, power adapters, precision flat housings requiring optical fiducial alignment |
| Horizontal Vial, Roll-Rubbing & Double-Side Labelers | ±1.0 mm – ±2.0 mm | 100–200 (vial) · 60–120 (round) · 60–150 (double-side) pcs/min | High-volume inline vials, cosmetics flat/square bottles, food & beverage jars |
| CCD Vision & Multi-Axis Tape / 450 mm Film Applicators | ±0.5 mm (CCD) · ±1.0 mm (2/3-Axis & Rotary) | 500 mm/s feed (~1,200 pcs/h on CCD auto-load) | Roll-fed double-sided, acrylic foam, PI high-temp tape (≥30 mm cut) & 450 mm film |
| YX-KB / YX-CS / YX-CH 3D Carton Erectors & Mailer Formers | ±0.3 mm – ±0.5 mm | 15–75 boxes/min | End-of-line 3D lock-bottom, tuck-end SBS cartons & FEFCO 0427 e-commerce mailers |
Need the standalone Python CLI or MIT-licensed formula source? Inspect our open repository on GitHub (packaging-automation-calculators) · Confronti tecnici e FAT · Request Free Sample Video Trial
YIXING Engineering Calculator & Tolerance Budgeting FAQs
Why must incoming part and die-cut tolerances be separated from machine repeatability?
Finished label or tape placement offset combines container/housing molding variance, die-cut slitting tolerance, and machine placement repeatability. YIXING catalog tolerances—±0.05 mm for dual-camera CCD vision labelers, ±0.5 mm for CCD vision tape applicators, and ±1.0 mm for mechanical fixtures—specify machine repeatability excluding incoming material variance. Use Root-Sum-Square (RSS) budgeting above before locking a model.
How does 500 mm/s linear tape feed translate into realistic hourly throughput (pcs/h)?
500 mm/s measures linear web feed rate; real floor throughput adds pneumatic non-stick blade shear dwell (≥30 mm standard minimum cut length), release-liner peeling/waste rewind, and part-indexing swap time. Manual-load benchtop/2-axis cells typically achieve ~600–950 pcs/h, while closed-loop CCD vision auto-loading stages reach ~1,200 pcs/h depending on strip count and stroke.
How do YIXING YX-KB/CS/CH 3D carton erectors differ from print-shop flat folder-gluers?
Print-shop folder-gluers fold and glue flat blanks that remain collapsed on pallets. YIXING YX-KB (lock-bottom), YX-CS (tuck-end/dual-mode), and YX-CH (scratch-free laminated SBS & corrugated FEFCO 0427 mailers, 15–75 boxes/min, 250–600 gsm) are end-of-line 3D carton erectors and mailer formers that erect upright boxes on your packaging line and link directly to inline tape sealing and 90° tamper-evident corner labeling.