Skip to content
YIXING Automation Equipment
Labeling Machines › Vision-Guided and Special-Purpose Labelers Not in the printed catalog — built to order

Dual-Camera Vision-Guided Labeling Machine

Conveyor-fed vision labeling machine equipped with dual industrial CCD cameras, uniform surface LED lighting, and an XYZR linear gantry to align both the workpiece and the peeled label before application.

Updated

Sample testing available Custom builds available

Applicable products
Precision electronic parts, molded housings, optical covers, and irregular parts requiring dual-camera alignment
Machine layout
Floor-standing conveyor machine: upper and lower CCD vision system, surface LED backlight, XYZR gantry, rear roll feeder

Dual-Camera Vision-Guided Labeling Machine — Overview

The dual-camera vision-guided labeling machine is built for small, recessed, or tight-tolerance labels where single-camera inspection is not enough. Inside the upper optical canopy and gantry zone, industrial CCD cameras with telecentric lenses and flat surface LED illumination capture crisp edges of both the incoming workpiece on the belt conveyor and the peeled label on the presentation stage.

An XYZR four-axis linear module carries the rotary vacuum pick-up head between the rear roll label feeder and the conveyor track. Using the coordinates from the dual-camera vision software, the controller corrects X, Y, and rotational offsets produced during label peeling and conveyor feeding, then presses the label squarely onto the part.

The upper console pairs a full-size vision monitor with a PLC touchscreen, start/stop buttons, and a slide-out keyboard tray. Optics, lighting, label feeder width, and conveyor guides are configured around your parts — send us samples for a free test run.

Dual-Camera Vision-Guided Labeling Machine — Key advantages

Dual industrial CCD camera alignment

Two camera channels inspect workpiece features and label pickup posture, eliminating peeling skew as well as conveyor positioning error.

Uniform surface LED illumination

An overhead flat LED light panel and optical window provide shadow-free contrast on matte, metallic, or dark electronic parts.

XYZR four-axis linear gantry

Rigid linear modules on X, Y, and Z with a rotary R-axis head deliver smooth, repeatable pick-and-place motion.

Rear roll feeder with liner rewinder

The rear unwinding reel, peel plate, and motorized take-up spool handle narrow or delicate die-cut roll labels cleanly.

Dual-screen operator console

A dedicated vision display shows camera views and alignment data alongside a PLC touchscreen for motion parameters and alarms.

Tailored to your label and workpiece

Camera field of view, suction tip shape, and conveyor width are engineered for your product geometry.

Dual-Camera Vision-Guided Labeling Machine — Applications

Suitable products

Chargers, power adapters, and electronic housingsPCBs, sensors, and optical modulesSmall die-cut labels, serial barcodes, and insulating films

Typical scenarios

  • High-precision placement of small labels into recessed cavities or tight bezels
  • Inline conveyor labeling where both label peeling offset and part angle must be corrected

Dual-Camera Vision-Guided Labeling Machine — Technical specifications

Dual-Camera Vision-Guided Labeling Machine — Technical specifications
Applicable products Precision electronic parts, molded housings, optical covers, and irregular parts requiring dual-camera alignment
Machine layout Floor-standing conveyor machine: upper and lower CCD vision system, surface LED backlight, XYZR gantry, rear roll feeder
Control Dual-screen upper console (vision monitor + PLC touchscreen), slide-out keyboard tray, tower light
Customization Camera lenses, lighting geometry, conveyor fixtures, and vacuum nozzle customized to your part and label

Options and customization

  • Custom vacuum suction nozzle and peel plate for micro labels or irregular die-cut shapes
  • Inline integration with upstream/downstream conveyors or automatic stacker loaders
  • Coaxial, ring, or backlight LED wavelengths matched to reflective or transparent materials

Selection tips

  • Share the smallest feature or recess on your part and the label dimensions so we can select the right camera lens and field of view.
  • Let us know if your labels come on rolls or sheets; for matrix sheets, see our Sheet-Feeder Vision-Guided Labeling Machine.
  • Send sample parts and labels to our Dongguan factory for a free video-documented alignment and speed test.

Dual-Camera Vision-Guided Labeling Machine — FAQ

Why use a Dual-Camera Vision-Guided Labeling Machine instead of a single-camera labeler?

A single camera only measures the workpiece position, whereas a dual-camera system also checks the peeled label posture on the nozzle or peel stage, correcting both label-peeling skew and workpiece angle before placement.

What kind of lighting is used inside the Dual-Camera Vision-Guided Labeling Machine?

The upper canopy integrates a flat surface LED illumination panel with a central optical aperture and industrial lens mount, giving even, low-glare lighting across the inspection area.

How are labels fed into the Dual-Camera Vision-Guided Labeling Machine?

Labels are supplied on rolls at the rear of the machine, where a motorized feeder unwinds the web, peels each label at the pick-up stage, and rewinds the release liner.

Can the Dual-Camera Vision-Guided Labeling Machine connect to an existing production line?

Yes. Its pass-through belt conveyor can run standalone with manual loading or connect directly to upstream and downstream conveyors or stacker units.

What placement accuracy can the Dual-Camera Vision-Guided Labeling Machine achieve?

Our standard brochure vision labeler is rated at ±0.05 mm (excluding part and label tolerances); for custom dual-camera builds, we verify and quote the exact accuracy on your samples.

Dual-Camera Vision-Guided Labeling Machine — Related machines

Accuracy and speed from the catalog; custom machines are built to each order.

Vision-Guided Precision Labeling Machine — Chargers, PCBs, Irregular-shaped products L28 Brochure p. 44 ±0.05 mm

Vision-Guided Precision Labeling Machine

The YIXING vision-guided labeling machine places labels and precision converted components at ±0.05 mm. A label feeder presents each label, an XYZR-axis module picks it up, and upper and lower cameras take positioning images before application. It runs at 15–25 pcs/min on chargers, PCBs and irregular-shaped products.

Speed15–25 pcs/min
Vision-Guided Labeling Machine with Automatic Loading and Unloading — Three-module inline vision labeling line: left magazine stacker loader, center CCD vision labeler, and right magazine stacker unloader W10 Custom builds available

Vision-Guided Labeling Machine with Automatic Loading and Unloading

Three-module inline vision-guided labeling line that unstacks flat parts from an infeed magazine, aligns and applies labels under CCD camera guidance, and restacks finished parts into an outfeed magazine.

Custom builds available
Sheet-feeder vision-guided labeling machine: front view with vision monitor, PLC touchscreen, front belt conveyor, and keyboard tray W12 Custom builds available

Sheet-Feeder Vision-Guided Labeling Machine

Vision-guided labeling machine with a rear pull-out sheet feeder that separates matrix sheets of die-cut labels, mirror films, or adhesive pads and applies them onto workpieces on the front conveyor under CCD camera guidance.

Custom builds available
Vision-guided assembly and labeling machine: front view with four-window vision monitor, PLC touchscreen, and dual backlit conveyors W14 Custom builds available

Vision-Guided Assembly and Labeling Machine

Dual-conveyor vision-guided assembly and labeling machine with translucent backlit conveyor lanes, dual overhead industrial CCD cameras, and an XYZR rotary vacuum head for aligning and laminating labels, tapes, or sub-components onto precision electronic parts.

Custom builds available

Labeling machines View all products

Dual-Camera Vision-Guided Labeling Machine — Send us your product — we test it before you decide

Share your product, label or tape specs and target output, and we will propose a configuration and quote.