Skip to content
YIXING Automation Equipment
Labeling Machines › Vision-Guided and Special-Purpose Labelers Not in the printed catalog — built to order

Vision-Guided Labeling Machine with Automatic Loading and Unloading

Three-module inline vision-guided labeling line that unstacks flat parts from an infeed magazine, aligns and applies labels under CCD camera guidance, and restacks finished parts into an outfeed magazine.

Updated

Sample testing available Custom builds available

Applicable products
Stacked flat parts, electronic housings, panels, and trays requiring vision-aligned labeling
Machine layout
Three-module inline line: left magazine stacker loader, center CCD vision gantry labeler, right magazine stacker unloader

Vision-Guided Labeling Machine with Automatic Loading and Unloading — Overview

The vision-guided labeling machine with automatic loading and unloading is an inline three-cabinet system built for flat or tray-held electronic, plastic, and metal workpieces that are handled in stacks. Instead of an operator feeding parts one by one, a left-hand magazine loader lifts a stack of parts between stainless-steel guide rods and transfers each part onto the center conveyor.

In the center station, an overhead industrial CCD camera captures the part position and angle on the conveyor, while a rear motorized roll feeder peels the next label. An XYZR linear gantry with a rotary vacuum head compensates for X, Y, and rotational offset before pressing the label onto the target area, with live camera images and alignment status shown on the upper monitor.

After labeling, the part travels into the right-hand magazine unloader, where a stepper-driven elevator platform lowers step by step to collect finished parts in a neat stack. Magazine dimensions, conveyor width, camera optics, and label feeder are built around your actual samples.

Vision-Guided Labeling Machine with Automatic Loading and Unloading — Key advantages

Magazine stacker loading and unloading

Left and right elevator cabinets hold full stacks between vertical guide rods, so one operator can load blanks and remove finished stacks without feeding parts piece by piece.

CCD camera position and angle compensation

The overhead vision system measures part position and rotation on the conveyor and guides the XYZR head to correct offset before applying the label.

Rear motorized roll label feeder

A rear unwinding and liner-rewinding unit peels roll-fed labels cleanly and presents them to the vacuum pick-up nozzle.

Independent touchscreens on each module

Both the loading/unloading cabinets and the center vision unit carry their own PLC touchscreens and emergency stops, making setup and stack-height adjustment straightforward.

Live vision monitor and keyboard console

A front-mounted industrial monitor with a slide-out keyboard and mouse displays real-time camera crosshairs, pass/fail status, and alignment coordinates.

Custom-built to your stack and label

Guide-rod spacing, stack height, conveyor width, and suction nozzle geometry are engineered around your sample parts and labels.

Vision-Guided Labeling Machine with Automatic Loading and Unloading — Applications

Suitable products

Electronic housings and charger shellsPCBs, carrier trays, and flat plastic panelsMetal plates, covers, and stacked sub-assemblies

Typical scenarios

  • Unattended stack-to-stack precision labeling of flat electronic housings
  • Inline CCD vision labeling where manual piece-by-piece feeding is too slow

Vision-Guided Labeling Machine with Automatic Loading and Unloading — Technical specifications

Vision-Guided Labeling Machine with Automatic Loading and Unloading — Technical specifications
Applicable products Stacked flat parts, electronic housings, panels, and trays requiring vision-aligned labeling
Machine layout Three-module inline line: left magazine stacker loader, center CCD vision gantry labeler, right magazine stacker unloader
Control Industrial vision monitor, PLC touchscreens on both loader/unloader cabinets and main unit, tower light
Customization Magazine guide rods, conveyor width, camera optics, and suction head tailored to your workpiece and label

Options and customization

  • Magazine guide-rod layout and elevator stroke sized to your part dimensions and stack count
  • Single or dual CCD camera optics for opaque, reflective, or transparent labels
  • NG reject handling or barcode/QR verification after label placement

Selection tips

  • Tell us the length, width, thickness, and stack height of your workpiece so we can size the loader and unloader magazines.
  • Provide your roll label dimensions, liner width, and target placement tolerance; we verify cycle time and accuracy on your actual parts free of charge.
  • If your parts arrive on a conveyor without stack magazines, compare our Dual-Camera Vision-Guided Labeling Machine or the standard brochure Vision-Guided Precision Labeling Machine.

Vision-Guided Labeling Machine with Automatic Loading and Unloading — FAQ

How does the Vision-Guided Labeling Machine with Automatic Loading and Unloading reduce operator labor?

Left and right magazine stacker cabinets automatically lift blank parts from an input stack and restack labeled parts at the outfeed, allowing one operator to tend multiple machines by loading and unloading whole stacks.

How does the machine maintain labeling accuracy when parts shift on the conveyor?

An overhead industrial CCD camera photographs each part in the labeling zone, calculates its X, Y, and rotational offset, and commands the XYZR gantry head to align the label with the part before pressing it down.

What label format does this inline vision labeling line use?

The center unit uses a rear motorized roll feeder with automatic liner rewinding for die-cut self-adhesive labels, protective films, or insulating pads supplied on rolls.

Can the magazine loader and unloader be adjusted for different part sizes?

Yes. The vertical stainless-steel guide rods and conveyor side guides are positioned for your workpiece footprint, and the elevator step height is set on the touchscreen.

How are labeling accuracy and cycle speed determined for my product?

Because stack transfer travel, part size, and camera field of view vary by order, we run a free sample test with your parts and labels and quote the verified accuracy and speed.

Vision-Guided Labeling Machine with Automatic Loading and Unloading — Related machines

Accuracy and speed from the catalog; custom machines are built to each order.

Vision-Guided Precision Labeling Machine — Chargers, PCBs, Irregular-shaped products L28 Brochure p. 44 ±0.05 mm

Vision-Guided Precision Labeling Machine

The YIXING vision-guided labeling machine places labels and precision converted components at ±0.05 mm. A label feeder presents each label, an XYZR-axis module picks it up, and upper and lower cameras take positioning images before application. It runs at 15–25 pcs/min on chargers, PCBs and irregular-shaped products.

Speed15–25 pcs/min
Dual-camera vision-guided labeling machine: front view with vision monitor, PLC touchscreen, belt conveyor, and keyboard tray W11 Custom builds available

Dual-Camera Vision-Guided Labeling Machine

Conveyor-fed vision labeling machine equipped with dual industrial CCD cameras, uniform surface LED lighting, and an XYZR linear gantry to align both the workpiece and the peeled label before application.

Custom builds available
Vision-Aligned Tape Applicator with Auto Loading & Unloading — Vision-aligned tape applicator with camera monitor W2 Custom builds available ±0.5mm

Vision-Aligned Tape Applicator with Auto Loading & Unloading

Tape applicator with CCD vision alignment and automatic loading and unloading, for PCBs, sheets and hardware or plastic parts from 50 × 50 mm to 350 × 350 mm.

SpeedAbout 1,200 pcs/hour
Dual-station automatic loading and unloading unit W8 Custom builds available

Dual-Station Automatic Loading and Unloading Unit

Automation unit with two stacking stations and a pick-and-place axis: it takes parts from a stack for the next process and stacks the finished parts again.

Custom builds available

Labeling machines View all products

Vision-Guided Labeling Machine with Automatic Loading and Unloading — Send us your product — we test it before you decide

Share your product, label or tape specs and target output, and we will propose a configuration and quote.