Applications
Vision-guided labeling, cable flag labels and precise tape application on boards, components and assemblies.
Updated
Electronics work needs small labels in exact positions. The vision-guided labeling machine locates each label with upper and lower cameras and places labels or converted components at ±0.05 mm; the semi-automatic high-precision labeler applies small labels to components at ±0.3 mm. Power and data cables get fold-over flag labels at ±0.3 mm and 15–25 pcs/min. For tape, the vision-aligned tape applicator aligns PCBs and sheets by CCD camera at ±0.5 mm and about 1,200 pcs/hour, and the desktop tape applicator tapes small parts at a workbench.
For this industry we recommend 5 of the 56 models on this site. Each is listed below with the accuracy and speed printed in our catalog; the figures are ratings of the standard models and exclude product and label or tape tolerances.
Standard models from our catalog that handle the products and the label or tape jobs described above.
Brochure p. 44 ±0.05 mm The YIXING vision-guided labeling machine places labels and precision converted components at ±0.05 mm. A label feeder presents each label, an XYZR-axis module picks it up, and upper and lower cameras take positioning images before application. It runs at 15–25 pcs/min on chargers, PCBs and irregular-shaped products.
Brochure p. 23 ±0.3 mm The YIXING semi-automatic high-precision labeling machine applies small labels to the top surface of electronic components, bags, boxes and plastic lids at ±0.3 mm accuracy. Products sit one at a time in a fixture and labels are applied by suction (vacuum + air-blow) at 15–25 pcs/min. It needs 0.4–0.6 MPa air.
Brochure p. 34 ±0.3 mm The YIXING fold-over labeling machine is a semi-automatic unit with a display that folds pre-printed labels around wires, cables, tubes and other slim workpieces to form flag labels. It works at ±0.3 mm and 15–25 pcs/min on diameters of 2.2–6.5 mm or 6.5–10.5 mm, and a fixture change adapts it to other sizes.
Custom builds available ±0.5mm Tape applicator with CCD vision alignment and automatic loading and unloading, for PCBs, sheets and hardware or plastic parts from 50 × 50 mm to 350 × 350 mm.
Brochure p. 13 ±1 mm The YIXING desktop tape applicator is a benchtop taping machine: the operator loads the part, the machine applies the tape and cuts it automatically, and the part is unloaded by hand. It has a 300 × 300 mm taping stroke, takes tape 5–50 mm wide and weighs 78 kg; automatic loading and unloading can be custom-built.
Catalog accuracy and speed of the recommended models, with the products each one suits.
| Model | Type | Accuracy | Speed | Suitable products |
|---|---|---|---|---|
| Vision-Guided Precision Labeling Machine | Labeling machines | ±0.05 mm | 15–25 pcs/min | Chargers, PCBs, Irregular-shaped products |
| Semi-Automatic High-Precision Labeling Machine | Labeling machines | ±0.3 mm | 15–25 pcs/min | Electronic components, Packaging bags, Packaging boxes |
| Semi-Automatic Fold-Over (Flag) Labeling Machine for Cables | Labeling machines | ±0.3 mm | 15–25 pcs/min | Power cords, Data cables, Wires and cables |
| Vision-Aligned Tape Applicator with Auto Loading & Unloading | Tape applicators | ±0.5mm | About 1,200 pcs/hour | PCBs and FPCs, Sheets and panels, Hardware parts |
| Desktop Tape Applicator | Tape applicators | ±1 mm | 500 mm/s | PCB panels, White sheets, Sheet parts |
Collected from the product pages of the recommended machines.
Vision-Guided Precision Labeling Machine, Semi-Automatic High-Precision Labeling Machine, Semi-Automatic Fold-Over (Flag) Labeling Machine for Cables, Vision-Aligned Tape Applicator with Auto Loading & Unloading, and Desktop Tape Applicator. The accuracy and speed of each model are in the comparison table above; every figure is the catalog rating of the standard model. Products outside these ranges can be handled by a custom machine.
Yes. Send us your products with the labels or tape you use, and we test them on a matching machine free of charge before you decide.
±0.05 mm, excluding product and label tolerances, at 15–25 pcs/min; the exact rate varies with product and label size.
±0.3 mm (excluding product and label tolerances), at 15–25 pcs/min.
From the Semi-Automatic High-Precision Labeling Machine page
Two ranges: 2.2–6.5 mm and 6.5–10.5 mm. Changing the fixture adapts the machine to workpieces of other sizes.
From the Semi-Automatic Fold-Over (Flag) Labeling Machine for Cables page
The CCD vision system corrects the position of each part, for a taping accuracy of ±0.5 mm.
From the Vision-Aligned Tape Applicator with Auto Loading & Unloading page
Share your product, label or tape specs and target output, and we will propose a configuration and quote.
Request a quoteWe use Google Analytics cookies to understand how visitors use this site. You can accept or decline; declining keeps the site fully usable.Privacy policy
