Skip to content
YIXING Automation Equipment
Labeling Machines › Vision-Guided and Special-Purpose Labelers Not in the printed catalog — built to order

Sheet-Feeder Vision-Guided Labeling Machine

Vision-guided labeling machine with a rear pull-out sheet feeder that separates matrix sheets of die-cut labels, mirror films, or adhesive pads and applies them onto workpieces on the front conveyor under CCD camera guidance.

Updated

Sample testing available Custom builds available

Applicable products
Products using die-cut labels, mirror films, protective lenses, or adhesive pads supplied on matrix sheets
Machine layout
Floor-standing conveyor machine: rear pull-out matrix sheet feeder with vacuum cups, CCD vision camera, XYZR gantry

Sheet-Feeder Vision-Guided Labeling Machine — Overview

Many stiff protective films, metallic mirror labels, and thick die-cut adhesive pads cannot be wound onto rolls without curling or lifting; they are supplied on flat matrix sheets instead. The sheet-feeder vision-guided labeling machine replaces the standard rear roll feeder with a pull-out sheet-feeding magazine at the back of the machine.

Inside the rear sheet feeder, vacuum suction cups and a sheet-transfer mechanism feed matrix sheets into the presentation zone, while workpieces enter along the front belt conveyor. An overhead CCD vision system locates both the die-cut items on the sheet and the target workpiece, and the XYZR four-axis gantry picks each label and places it with position and angle compensation.

The upper console houses a vision monitor and a PLC touchscreen for sheet pitch, feeder indexing, and motion control. Sheet magazine dimensions, suction nozzle geometry, and conveyor width are built to your actual sheet layout and parts.

Sheet-Feeder Vision-Guided Labeling Machine — Key advantages

Rear pull-out matrix sheet feeder

Handles die-cut labels, mirror lenses, and thick adhesive pads supplied on flat sheets that cannot be bent around a label roll.

Vacuum suction sheet separation

Pneumatic suction cups and guide rails in the rear feeder advance matrix sheets smoothly into the peeling and pickup position.

CCD vision coordinate recognition

Camera vision locates each die-cut piece on the matrix sheet and aligns it with the receiving part on the conveyor.

XYZR four-axis pick-and-place gantry

Linear X, Y, and Z axes with a rotary R-axis head transfer sheet-fed items to the conveyor with angular compensation.

Dual-screen vision and PLC console

The front console combines a live vision display with a PLC touchscreen and keyboard tray for quick sheet-array setup.

Engineered for your sheet layout

Feeder drawer dimensions, vacuum cup spacing, and pickup nozzles are customized around your matrix sheet and product.

Sheet-Feeder Vision-Guided Labeling Machine — Applications

Suitable products

Circular mirror films, lens stickers, and stiff die-cut labels on sheetsElectronic housings, cosmetic compacts, and optical coversThick foam pads, insulating sheets, and nameplates

Typical scenarios

  • Applying stiff mirror films or thick die-cut pads that would delaminate if supplied on rolls
  • High-precision vision labeling directly from multi-row, multi-column matrix sheets

Sheet-Feeder Vision-Guided Labeling Machine — Technical specifications

Sheet-Feeder Vision-Guided Labeling Machine — Technical specifications
Applicable products Products using die-cut labels, mirror films, protective lenses, or adhesive pads supplied on matrix sheets
Machine layout Floor-standing conveyor machine: rear pull-out matrix sheet feeder with vacuum cups, CCD vision camera, XYZR gantry
Control Upper vision monitor, PLC touchscreen, start/stop buttons, slide-out keyboard tray, tower light
Customization Sheet feeder tray size, vacuum suction cup array, camera optics, and conveyor tailored to your sheet and part

Options and customization

  • Sheet feeder tray and suction cup manifold customized to your sheet size and row-by-column matrix
  • Spent liner sheet ejection or collection tray
  • Custom conveyor fixtures or inline connection to upstream/downstream lines

Selection tips

  • Send us the overall length and width of your matrix sheet, the number of rows and columns, and the thickness of each die-cut piece.
  • If your labels can be supplied on rolls rather than flat sheets, compare our Dual-Camera Vision-Guided Labeling Machine.
  • Mail sample sheets and workpieces to our Dongguan factory for a free test video and cycle-time evaluation.

Sheet-Feeder Vision-Guided Labeling Machine — FAQ

When should I choose a Sheet-Feeder Vision-Guided Labeling Machine over a roll-fed labeler?

Choose the sheet-feeder model when your labels, mirror films, acrylic lenses, or thick foam pads are too rigid to wrap around a roll core without tunneling or pre-peeling, and are therefore die-cut on flat matrix sheets.

How does the rear sheet feeder work on the Sheet-Feeder Vision-Guided Labeling Machine?

A pull-out feeder module at the back of the machine holds flat matrix sheets and uses vacuum suction cups and pneumatic cylinders to separate and index each sheet into the gantry pickup area.

Can the machine pick multiple rows and columns of labels from one sheet?

Yes. The CCD vision system and XYZR gantry step across the rows and columns of the matrix sheet, locating and picking each die-cut piece in sequence until the sheet is finished.

How are the receiving products fed into the machine?

Workpieces travel along the front belt conveyor into the vision station, either loaded by an operator or transferred from an upstream conveyor line.

How do you confirm whether my sheet material separates cleanly?

Send us several sample sheets and parts; we test sheet separation, vacuum pickup, and vision placement in our factory free of charge before quoting.

Sheet-Feeder Vision-Guided Labeling Machine — Related machines

Accuracy and speed from the catalog; custom machines are built to each order.

Vision-Guided Precision Labeling Machine — Chargers, PCBs, Irregular-shaped products L28 Brochure p. 44 ±0.05 mm

Vision-Guided Precision Labeling Machine

The YIXING vision-guided labeling machine places labels and precision converted components at ±0.05 mm. A label feeder presents each label, an XYZR-axis module picks it up, and upper and lower cameras take positioning images before application. It runs at 15–25 pcs/min on chargers, PCBs and irregular-shaped products.

Speed15–25 pcs/min
Dual-camera vision-guided labeling machine: front view with vision monitor, PLC touchscreen, belt conveyor, and keyboard tray W11 Custom builds available

Dual-Camera Vision-Guided Labeling Machine

Conveyor-fed vision labeling machine equipped with dual industrial CCD cameras, uniform surface LED lighting, and an XYZR linear gantry to align both the workpiece and the peeled label before application.

Custom builds available
Vision-Guided Labeling Machine with Automatic Loading and Unloading — Three-module inline vision labeling line: left magazine stacker loader, center CCD vision labeler, and right magazine stacker unloader W10 Custom builds available

Vision-Guided Labeling Machine with Automatic Loading and Unloading

Three-module inline vision-guided labeling line that unstacks flat parts from an infeed magazine, aligns and applies labels under CCD camera guidance, and restacks finished parts into an outfeed magazine.

Custom builds available
Vision-guided assembly and labeling machine: front view with four-window vision monitor, PLC touchscreen, and dual backlit conveyors W14 Custom builds available

Vision-Guided Assembly and Labeling Machine

Dual-conveyor vision-guided assembly and labeling machine with translucent backlit conveyor lanes, dual overhead industrial CCD cameras, and an XYZR rotary vacuum head for aligning and laminating labels, tapes, or sub-components onto precision electronic parts.

Custom builds available

Labeling machines View all products

Sheet-Feeder Vision-Guided Labeling Machine — Send us your product — we test it before you decide

Share your product, label or tape specs and target output, and we will propose a configuration and quote.