Skip to content
YIXING Automation Equipment
Labeling Machines › Vision-Guided and Special-Purpose Labelers Not in the printed catalog — built to order

Vibratory-Feeder Vision-Guided Labeling Machine

Vision-guided labeling machine with a side stainless-steel vibratory hopper and backlit dispersion tray that feeds bulk small parts, identifies their coordinates and orientation with dual overhead CCD cameras, and applies roll-fed labels or assemblies onto the main conveyor.

Updated

Sample testing available Custom builds available

Applicable products
Bulk small molded parts, metal stampings, connectors, buttons, and electronic components requiring automatic feeding and vision labeling
Machine layout
Side stainless-steel vibratory hopper + linear vibrator + backlit vision dispersion tray + dual overhead CCD cameras + XYZR gantry + front belt conveyor + rear roll feeder

Vibratory-Feeder Vision-Guided Labeling Machine — Overview

Small injection-molded parts, metal stampings, buttons, and connectors are typically delivered in bulk bags rather than neat stacks or carrier trays. Hand-orienting and placing those tiny parts onto a conveyor is slow and tiring. The vibratory-feeder vision-guided labeling machine mounts a stainless-steel vibratory hopper and electromagnetic linear feeder on the left side of the machine to feed bulk parts onto a translucent white backlit dispersion tray.

Inside the upper optical canopy, two industrial CCD cameras work together: the first camera looks down at the backlit dispersion tray to detect the position, orientation, and face-up state of scattered parts, while the second camera monitors the labeling zone on the front belt conveyor. The XYZR four-axis linear gantry and rear motorized roll feeder pick, orient, and label parts with high repeatability.

Unlike a traditional mechanical bowl feeder with fixed track tooling for only one part shape, the backlit dispersion tray and overhead CCD camera can switch to a new small part through software template teaching. Hopper capacity, tray backlighting, suction tips, and roll feeder width are tailored to your samples.

Vibratory-Feeder Vision-Guided Labeling Machine — Key advantages

Side stainless-steel vibratory hopper

Holds bulk small parts and meters them onto the dispersion tray via an electromagnetic linear vibrator, eliminating manual sorting.

Backlit flexible dispersion tray

A white translucent tray lit from below separates small parts and gives the overhead camera sharp silhouettes without mechanical track jamming.

Dual industrial CCD cameras

Two camera channels inside the upper enclosure independently cover the side dispersion tray and the main conveyor labeling zone.

XYZR four-axis linear gantry

High-rigidity linear axes with a rotary R-axis head rotate and align parts and labels to any required angle.

Rear motorized roll label feeder

Unwinds, peels, and rewinds roll-fed labels, barcode stickers, or die-cut adhesive pads automatically.

Quick changeover for small parts

Because part orientation is recognized by camera vision on the backlit tray rather than rigid track rails, changing part sizes is fast.

Vibratory-Feeder Vision-Guided Labeling Machine — Applications

Suitable products

Small injection-molded plastic parts, buttons, and capsPrecision metal stampings, terminals, and connector housingsMicro electronic modules, sensors, and acoustic components

Typical scenarios

  • Automatic bulk feeding and vision-aligned labeling of small parts delivered in bags
  • Flexible multi-variety small-part feeding without jamming in mechanical tracks

Vibratory-Feeder Vision-Guided Labeling Machine — Technical specifications

Vibratory-Feeder Vision-Guided Labeling Machine — Technical specifications
Applicable products Bulk small molded parts, metal stampings, connectors, buttons, and electronic components requiring automatic feeding and vision labeling
Machine layout Side stainless-steel vibratory hopper + linear vibrator + backlit vision dispersion tray + dual overhead CCD cameras + XYZR gantry + front belt conveyor + rear roll feeder
Control Upper vision monitor, PLC touchscreen, vibratory amplitude controller, slide-out keyboard tray, tower light
Customization Vibratory hopper chute, backlit dispersion platform, dual-camera optics, and suction nozzle customized to your bulk parts

Options and customization

  • Vibratory hopper volume, chute width, and dispersion tray excitation tailored to part weight and geometry
  • Custom vacuum suction nozzles or micro-grippers for tiny or irregular parts
  • NG reject bin or post-labeling vision verification on the outfeed conveyor

Selection tips

  • Send us photos, dimensions, and unit weight of your bulk parts, and tell us whether the top and bottom faces look different from above.
  • If your parts are stacked flat rather than poured in bulk, compare our Vision-Guided Labeling Machine with Automatic Loading and Unloading.
  • Mail a bag of sample parts and a roll of labels to our Dongguan factory for a free dispersion, vision recognition, and labeling trial.

Vibratory-Feeder Vision-Guided Labeling Machine — FAQ

How does the Vibratory-Feeder Vision-Guided Labeling Machine handle bulk small parts?

A side-mounted stainless-steel vibratory hopper and electromagnetic linear vibrator meter bulk parts onto a white backlit dispersion tray, where an overhead CCD camera locates each part for robotic pickup and labeling.

Why use a backlit vision dispersion tray instead of a conventional mechanical bowl track?

Thin, delicate, or irregular parts often jam in narrow mechanical bowl tracks and require a new bowl for every part change; a backlit dispersion tray with CCD vision recognizes part orientation optically and switches products via software.

Why are there two industrial CCD cameras inside the upper canopy?

One camera is aimed at the side backlit dispersion tray to locate scattered bulk parts, and the second camera is aimed at the front conveyor station to guide high-precision label alignment.

How are the labels supplied on this machine?

A motorized roll feeder at the rear of the machine unwinds roll labels or die-cut adhesive pads, peels each piece at the pickup plate, and rewinds the backing liner.

Can the machine distinguish between face-up and face-down parts on the tray?

Yes. The overhead CCD camera checks the contour or surface features of each part on the backlit tray and only picks parts that are lying face-up in a valid orientation.

Vibratory-Feeder Vision-Guided Labeling Machine — Related machines

Accuracy and speed from the catalog; custom machines are built to each order.

Vision-Guided Precision Labeling Machine — Chargers, PCBs, Irregular-shaped products L28 Brochure p. 44 ±0.05 mm

Vision-Guided Precision Labeling Machine

The YIXING vision-guided labeling machine places labels and precision converted components at ±0.05 mm. A label feeder presents each label, an XYZR-axis module picks it up, and upper and lower cameras take positioning images before application. It runs at 15–25 pcs/min on chargers, PCBs and irregular-shaped products.

Speed15–25 pcs/min
Dual-camera vision-guided labeling machine: front view with vision monitor, PLC touchscreen, belt conveyor, and keyboard tray W11 Custom builds available

Dual-Camera Vision-Guided Labeling Machine

Conveyor-fed vision labeling machine equipped with dual industrial CCD cameras, uniform surface LED lighting, and an XYZR linear gantry to align both the workpiece and the peeled label before application.

Custom builds available
Vision-guided assembly and labeling machine: front view with four-window vision monitor, PLC touchscreen, and dual backlit conveyors W14 Custom builds available

Vision-Guided Assembly and Labeling Machine

Dual-conveyor vision-guided assembly and labeling machine with translucent backlit conveyor lanes, dual overhead industrial CCD cameras, and an XYZR rotary vacuum head for aligning and laminating labels, tapes, or sub-components onto precision electronic parts.

Custom builds available
Vision-Guided Labeling Machine with Automatic Loading and Unloading — Three-module inline vision labeling line: left magazine stacker loader, center CCD vision labeler, and right magazine stacker unloader W10 Custom builds available

Vision-Guided Labeling Machine with Automatic Loading and Unloading

Three-module inline vision-guided labeling line that unstacks flat parts from an infeed magazine, aligns and applies labels under CCD camera guidance, and restacks finished parts into an outfeed magazine.

Custom builds available

Labeling machines View all products

Vibratory-Feeder Vision-Guided Labeling Machine — Send us your product — we test it before you decide

Share your product, label or tape specs and target output, and we will propose a configuration and quote.